Virtually a 12 months has handed since Gambody acquired the FLSUN V400 3D printer, and it has develop into one of many favourite machines within the firm’s workplace. Our group used roughly 3.8 miles (6 km) of filament and printed over 1,000 hours in lower than a 12 months! After spending a lot time engaged on varied tasks (easy, advanced, quick, and lengthy), printing with completely different filament sorts and print settings, Gambody affords an in depth have a look at this 3D printer enclosure.

However earlier than we overview the brand new FLSUN V400 encloser, let’s share some notes on the super-fast FLSUN V400 3D printer:

1. It’s important to say the very handy FLSUN V400 Internet Interface. You are able to do practically every little thing to your 3D printing mission with out leaving your pc. The interface affords many beneficial settings.
2. The ample printing area is unbelievable. Regardless of its uncommon cylindrical form, this 3D printer can construct massive components and objects with out points.
3. The enormous FLSUN 3D printer is problem-free. Throughout the ten months of 3D printing, Gambody by no means had a nozzle clog downside, Interface glitch, or points with kinematics. It is rather pleasing!

Recommendation: Please spend sufficient time calibrating the 3D printer out of the field. FLSUN V400 operates at excessive speeds. We encountered an issue when the 3D printer extruded extra filament than vital, which may damage small components at excessive speeds. Thus, pay particular consideration to the movement charge calibration. Additionally, keep in mind to sometimes calibrate the 3D printer mattress and clear it with alcohol or detergent earlier than you start your 3D printing mission, as this could have an effect on the standard of the print!

FLSUN V400 comes with glue, however avoiding utilizing it or another PVP glue is greatest. They complicate the adhesion of the filament, primarily in the event you work with PLA. Moreover, take your time to regulate the strain of the 3D printer belts. They need to not sag or be over-tightened. You may alter the strain utilizing a specific gadget, which you’ll be able to google and 3D print your self. And lubricate your 3D printer on time.

Let’s communicate of some drawbacks recognized through the 3D printing course of, after which we’ll focus on the brand new 3D printer enclosure:

1. The primary and most vital factor to notice is the printer’s incapability to proceed 3D printing after an influence outage or surgical procedure. Most of at the moment’s desktop 3D printers can rapidly clear up this downside, however the V400 can not.
2. The hotend’s fan is boisterous. It’ll intrude together with your work in case your 3D printer runs close by.
3. The filament spool and display areas will not be essentially the most handy. The display, for instance, typically falls from its stand as a result of it’s not very securely mounted to it.
4. The open body wants particular consideration and extra particulars as a result of it lacks a 3D printer field.

3D Printer Enclosure

When the 3D printer was launched, many lovers started looking for concepts to construct a thermal 3D printer enclosure for V400. It may enhance the print high quality and permit working with ABS filament if the V400 enclosure can protect a common temperature.

Such concepts are justified. The distinctive 3D printer form (guides join its backside and high) makes constructing a 3D printer field from scrap supplies simple, as it is best to solely cowl the open areas. Engineers instantly started engaged on options, and now you can discover many free and paid 3D printer enclosure choices on the Web.

A number of 3D printer case concepts grew to become actual tasks. They guarantee a relentless, elevated temperature contained in the field, eliminating air and drafts, permitting hobbyists to work with ABS filament, and creating higher-quality 3D prints.

Learn additionally: Over 100 Enjoyable 3D Printer Initiatives

FLSUN V400 Enclosure

The opinions and concepts shared by lovers reached FLSUN. The corporate accepted the consumer suggestions and offered a beneficial replace, the V400 enclosure.

This new official 3D printer enclosure for V400 is obtainable at $160 on the FLSUN web site. As soon as Gambody noticed this glorious addition, we needed to check it and share the overview with our readers and 3D printing hobbyists. It’s time to see if the FLSUN V400 enclosure can enhance print high quality and allow you to create even higher tasks.

The official 3D printer enclosure arrives in a branded field, massive however gentle, measuring 33.9 x 16.5 x 7.1 inches (860 x 420 x 180 mm).

Contained in the field with a 3D printer cowl, you can find three rails, three strong plastic lids, quick directions, and 6 small 3D printed restrict blocks. Every panel is protected by movie and packaged nicely, so that you don’t want to fret about 3D printer enclosure security upon supply.

The directions are easy. They describe the duvet set up steps to your FLSUN V400 3D printer. Unscrew the higher corners, slide the restrict blocks to the underside of the enclosure, insert the rails vertically alongside the axis groove to the underside, and take into consideration the panel you propose to open most frequently. By default, every cowl can solely rise barely over 3.9 inches (10 cm). If you wish to elevate the duvet to its most top, take away among the restrict blocks on that aspect.

It’s simple to put in and take away restrict blocks and the V400 enclosure. However wait to run the printer. Due to the brand new 3D printer field, the machine wants to regulate the effector place after the pause. In any other case, the printer’s head will hit the brand new clear glass barrier. In response to FLSUN 3D printer enclosure directions, it is best to add code modifications to redefine the effector place. In different phrases, you want a pc to make use of the printer’s internet interface.

After you modify the coordinate, save the modifications, and restart your 3D printer, the higher corners will return to their place, and you should have a powerful machine contained in the FLSUN V400 enclosure. Wow! It seems so wonderful!

Learn additionally: 3D Printed Avatar Collectible figurines

V400 Enclosure Benefits

The brand new 3D printer field seems like an alien capsule, including good price to the general value of V400. Now it appears full and costly! Gambody believes that FLSUN will provide all its future high 3D printers with related 3D printer case concepts as a result of such an enclosure is snug and appears nice.

Nonetheless, a wonderful look isn’t the one cause for getting the official FLSUN 3D printer enclosure. Gambody has been testing the upgraded V400 for a month and is now able to share our feelings and benefits you’ll like:

1. With a 3D printer enclosure, V400 has develop into a lot quieter. The brand new cowl fixes the noise downside, eliminating it.
2. The 3D printer case brings cleanliness and sterility and improves print high quality. No extra dust or mud will settle in your V400 mattress. The mannequin adhesion to the mattress can be enhanced.
3. No extra drafts. Hobbyists whose 3D printers are within the storage or close to the window expertise a extreme downside with drafts, negatively affecting the printing course of (primarily for ABS and partially for PLA) by altering the temperature. Climate situations, like humidity modifications brought on by heavy rain, also can affect the prints. Fortunately, the V400 enclosure solves this downside. The filament spool is the one factor that continues to be exterior the case, however it could be unbelievable to position it contained in the enclosure, too.
4. The FLSUN 3D printer enclosure creates a thermal impact. Due to the closed circuit and fixed mattress and hotend heating, a relentless excessive temperature and dry air kind contained in the 3D printer field, positively affecting 3D printing. Printing with ABS filament is now attainable, however be very cautious with this materials. Don’t inhale its poisonous vapors that kind contained in the 3D printer case, and ventilate your 3D printing laboratory always.
5. Easy upkeep. Cleansing your 3D printer mattress contained in the FLSUN V400 enclosure is straightforward as a result of you’ll be able to raise the duvet.

3D Printer Field Disadvantages

Gambody should point out minor disadvantages skilled whereas utilizing the brand new 3D printer enclosure by FLSUN:

1. The 3D printer case makes putting in the mattress calibration sensor more difficult. Even when the lid stays open, will probably be in the best way.
2. It’s tremendous simple to scratch the plastic field. Wipe your 3D printer with a gentle fabric solely.
3. The FLSUN V400 enclosure takes up lots of area. Hobbyists who’ve restricted area would possibly go with out this 3D printer cowl.
4. Some lovers would possibly discover the case value too excessive. However it’s price it contemplating the price of the enormous V400 3D printer.
5. It will be good if the display stayed mounted on its panel. Nonetheless, it’s only a private want.

Conclusion

We’re glad that FLSUN considers its clients’ suggestions and transforms customers’ needs into nice merchandise. It launched a brand new 3D printer enclosure fairly quick. This V400 field improves the printer’s look and print high quality. Contemplating the excessive case value, weighing all the benefits and drawbacks earlier than buying this correct replace is greatest. The skilled V400 enclosure is price it!

(Visited 72 instances, 1 visits at the moment)