It is the Hissing Silence Shell from Future 2, now totally printable!

All items are supposed to be press- or snap-fit; it’s best to have the ability to assemble the ghost with out glue. Watch out of tolerances if scaling up or down. The central core rotates freely inside the clamshell; in the event you don’t love that, you’ll be able to add some tape rolls between the core and the clamshell partitions, the place they aren’t seen from the surface.

Holds an LED tea gentle to make the ghost’s show glow. When assembling the ghost, mate the underside of the submit on the “knob” piece with the straight bar within the heart of the LED’s again. You’ll be able to then rotate the knob to show the sunshine on and off with out taking the mannequin aside. Works with these LED lights (select “flower form”): https://www.ebay.com/itm/171239692713?_trksid=p2059210.m2749.l2649&var=470455566681&ssPageName=STRKpercent3AMEBIDXpercent3AIT

For an entire mannequin, print:

hsgs_winglet_curve_a in Colour A (4x)
hsgs_winglet_curve_b in Colour A (4x)
hsgs_winglet_curve_c in Colour B (4x)
hsgs_case_a_holes in Colour B (2x)
hsgs_case_a_pegs in Colour B (2x)
hsgs_case_b_holes in Colour B (2x)
hsgs_case_b_pegs in Colour B (2x)
hsgs_fins in Colour B (2x)
sphere_pegs in Colour B (1x)
sphere_holes in Colour B (1x)
knob in Colour B (1x)
sphere_ins_a or sphere_ins_b (1x) in Black

For a “conventional” Hissing Silence Shell just like the one within the sport, Colour A needs to be White, Colour B needs to be Black, and the LED needs to be Blue.

See the “Print Settings” module for necessary printing hints.