Home IoT Radxa Launches the Compact, Low-Value Intel Celeron J4125-Based mostly X2L Single-Board Pc

Radxa Launches the Compact, Low-Value Intel Celeron J4125-Based mostly X2L Single-Board Pc

0
Radxa Launches the Compact, Low-Value Intel Celeron J4125-Based mostly X2L Single-Board Pc

[ad_1]

Embedded computing specialist Radxa has launched a compact, low-cost Intel-based single-board pc, roughly the footprint of a contemporary smartphone, with an Intel Celeron J4125 processor — and a 40-pin general-purpose enter/output (GPIO) header pushed by a Raspberry Pi RP2040 microcontroller.

Described by the corporate as “the subsequent technology of SBC [Single Board Computer] type issue design,” the Radxa X2L measures an unusually-rectangular 155×80mm (round 6.1×3.15″) — not one million miles away from the footprint of a smartphone. Its coronary heart is a quad-core Intel Celeron J4125 processor with 4 cores operating at 2GHz base and a pair of.7GHz burst and with an built-in Intel UHD Graphics 600 graphics processor.

To this, Radxa’s design — delivered to our consideration by CNX Software program — provides a selection of 2GB, 4GB, or 8GB of LPPDR4 reminiscence, M.2 M-key and E-key slots for non-obligatory 2280-format Non-Risky Reminiscence Specific (NVMe) storage and radio modules respectively, a gigabit Ethernet port, two USB 3.0 and two USB 2.0 ports, a 3.5mm analog audio jack with microphone assist, and a pair of 4k30-capable HDMI outputs. A USB Sort-C connector serves as an influence enter, negotiating 12V 2A over USB Energy Supply (PD).

Maybe probably the most attention-grabbing side of the board is its Raspberry Pi-like 40-pin GPIO header, which is linked to a Raspberry Pi RP2040 dual-core microcontroller performing as a coprocessor and delivering as much as 16 pulse-width modulation (PWM) pins, two SPI, two UART, and two I2c buses, and the eight Programmable Enter/Output (PIO) blocks which give the RP2040 its much-vaunted flexibility.

Being based mostly on a 64-bit Intel x86 processor means broad software program compatibility, too: Radxa confirms official assist for Debian and Ubuntu Linux plus Microsoft’s Home windows 10, and whereas Home windows 11 is not formally supported it ought to be installable utilizing identified bypasses for the working system’s want for a Trusted Platform Module 2.0 (TPM 2.0) lacking from the X2L.

Radxa has partnered with AllNET China and Arace to promote the X2L, priced at $39 for a 2GB mannequin, $52 for a 4GB, and $72 for an 8GB; the 8GB variant can also be obtainable with a pre-installed 32GB eMMC module at $82, whereas an lively heatsink and fan meeting is a further $9.90. Extra info is on the market on the official product web page.

[ad_2]