A brand new search for the well-known FMS ATLAS 6WD.

This one is, once more, impressed by vehicles in Snowrunner online game.

Major body is fitted onto the truck, you simply must take away all rear plastic elements on the rear space of the mannequin

You want M1.4 screws to suit the rear of the primary body within the final rear holes of the Atlas chassis body.
6 screws helps to correctly find the underside plate on the primary body, however some glue is required to get it accurately assembled.
This backside plate is printed flat and bent after printing. A jig assist you to get the proper angles. It’s higher to bend when the half remains to be a bit scorching. See piectures to verify the way it must be when assembled.
The roof if printed flat as effectively and bent additionally. Use entrance finish or rear finish to get the correct angles.

I counsel to connect the 2 sides panel to the underside plate. There’s a rib on the aspect panels to find with the underside plate. Modify angles earlier than glueing and press throughout meeting to wager it proper.
Verify 90° angle between each to get a sq. shelter.
one after the opposite and now place the entrance panel between each aspect panels, once more ribs halps to find.
Add extra glue from the inside aspect to safe meeting
Then verify everythng is squared and never twisted and let it dry a bit
Now could be coming roof meeting, verify once more the angles and place the roof on the field with some tape. then add glue from the interior aspect to keep away from glue marks on the outside. See photos
verify every little thing is squared and let it dry. verify it s glued each the place earlier than eradicating the tape.
Then finish with entrance panel. Use some tape advert a hinge to get git on the proper place.
Every thing else is added to the field utilizing jigs and you’ll doo what ever you need. Footage can present you ways I made it.
Antennas are what’s popping out of the nozzle, simply extrude in excessive place, the wire is 0.4mm diamter and ideal for the antenna. It’s simply match into the opening, then if damaged you’ll be able to change simply.

Quite simple to print

All screws are M1,4 x 6 8 mm relies upon of the place.

As common you need to redrill holes to 1.2mm when a screw has to screw in and redrill to 1.5mm when a screw has to undergo freely.

Components must be situated correctly on the mattress as I do not know find out how to do it on the design part

Mattress 50°
Nozzle 205°C
No assist required